Marmot Tungsten 2P Tent: A detailed review

Have you ever wondered how people spent the night in deep forests? We hope you know by now that a tent is the ultimate solution.  Marmot Tungsten 2P tent is not only used by people for spending the night in deep forests and  is also used in hiking, trekking, etc. 

What is a tent? 

A tent is a type of shelter built out of pieces of fabric. Other materials are also used which spread over a frame of poles or a supportive rope. Smaller tents can be freestanding or linked to the ground. However, larger tents are tethered by hanging ropes fastened to poles or tent pins.

What materials are used to construct tents?

Tents are typically constructed using poles, ropes, and tent materials. Polyester is by far the most used tent fabric since it is both durable and inexpensive. Cotton, PVC, cotton linen, and polyester are examples of other materials reported to be utilized.

Marmot Tungsten 2P Tent 

In a nutshell, the Marmot Tungsten 2 is a tent. It’s not particularly thrilling, but that’s not always a negative thing. It is simple to construct with a typical three-pole configuration and a huge fly. The interior is roomy, and the two entrances allow campers to come and depart without bothering their spouse. Because the vestibules aren’t massive and come in varying sizes, you’ll have to play rock-paper-scissors to see who gets the bigger one. 

Key Specifications of Marmot Tungsten 2P

1. Capacity: 2 people – Designed to comfortably accommodate two adult campers.
2. Dimensions: The floor area is typically around 32 square feet, and the interior height is around 42 inches, providing enough space to sit up comfortably.
3. Weight: The packed weight of the tent is around 4-5 pounds (approximately 1.8-2.3 kilograms). This weight includes the tent body, rainfly, poles, stakes, and stuff sacks.
4. Materials: The tent is constructed with lightweight and durable materials, including a combination of polyester and nylon fabrics for the tent body and rainfly.
5. Freestanding: The tent is freestanding, which means it doesn’t require stakes to stand upright. However, staking it down is necessary to secure it against wind and provide additional stability.
6. Poles: The tent typically comes with lightweight aluminum poles that are easy to set up and pack down.
7. Vestibules: The tent often includes two vestibules for gear storage and protection, providing extra space outside the sleeping area.
8. Doors: The Marmot Tungsten 2P tent usually has two doors, allowing easy access for both occupants without disturbing each other.
9. Ventilation: To reduce condensation and enhance airflow, the tent generally features mesh panels and vents that promote adequate ventilation.
10. Weather Resistance: The tent is designed to withstand various weather conditions and may have a waterproof rainfly and sealed seams to keep occupants dry during rain.
11. Setup: The tent is designed to be relatively easy to set up, thanks to color-coded poles and clips.

Marmot Tungsten 2P Tent Features

Comfort 

The Marmot Tungsten 2P has 42in of headroom, which allows almost everyone to sit up comfortably. The entire internal size is 32 square feet, barely three square feet less than the REI Half Dome SL 2+, but it still ranks second in terms of floor space.

The vestibules formed when the rainfly is connected are of two sizes. There are two vestibules, one 9.5 square feet, and one 6.5 square feet. Hence anyone who overpacks will have some additional space to put their belongings. The poles are pre-bent towards the bottom to provide a more vertical internal wall. Allowing for additional headspace when lying. It’s fantastic to see such subtle design details in a low-cost tent.

There are various useful elements throughout the inside for your convenience. These are such as the lampshade pocket. This may assist disperse light and produce a more ambient glow while using a headlamp. There are inner pockets along the interior walls to aid with small gear management. 

Ease of set-up 

The tent is easy to assemble thanks to its typical pole layout of three poles. The primary structure is formed by two bigger poles intersecting in the center. There is also a crossbar pole going across to the doors. Enlarging the internal space and giving the walls a more vertical slant. The fly is when the setup becomes problematic.

The fly has red tabs to ensure it is properly positioned on the exterior of the tent. It is, however, a difficult fly to tension properly. On a windy night, regions that are left droopy or bunched up can be particularly loud. Maintaining adequate fly tension might be the difference between a tranquil and a nightmare night. If the fly makes contact with the mesh, the tent body will not be able to “breathe” as efficiently, resulting in serious condensation concerns.

Weatherproofing 

Marmot’s rainfly is made of 68D polyester taffeta. It is quite durable, but if not correctly tensioned, it will droop and hit the mesh wall, reducing airflow. A wide vent at the top of the fly dumps heat during warm nights, boosting tent comfort. Marmot has added weather protection by seam-taping the catenary cut floor. The Tungsten will keep you dry and toasty; just make sure the fly is appropriately tensioned, and you’ll be ready to burrow into your sleeping bag. If the fly makes contact with the mesh, the tent body will not be able to “breathe” as efficiently, resulting in serious condensation concerns.

Durability 

The Marmot Tungsten 2P is made entirely of polyester taffeta. Polyester is slightly heavier and weaker than nylon in general, however, Marmot has employed certain thicker deniers (fabric weight) to increase durability without considerably weighing down the tent. The floor is 70D polyester taffeta, and the side walls, like the fly, are 68D. Marmot has added a footprint made of 68D polyester taffeta fabric. This helps to extend the life of the tent.

Weight 

The Marmot Tungsten 2P weights 5lbs. It is the second heaviest tent behind the REI Co-op Trail Hut 2 which weighs about 5 lbs. While it is not a lightweight tent, it would be ideal as a weekend adventure companion. For a paddling excursion when you need substantial weather protection. However, don’t mind the weight.

Comparisons to the Marmot Tungsten 2P

There are many more tents available in the market. You have MSR Hubba Hubba NX2 & Nemo Hornet 2P along with Marmot Tungsten. They all belong to the same category. However, Marmot Tungsten seems to be more convenient and user-friendly. Not only that, if we look at the statistics, Marmot Tungsten is more spacious, more durable, and rigid at the same time. You can pretty much rely on Marmot Tungsten 2P for a great camping experience. 

Competitor Tents to Marmot Tungsten 2P

Tent Name	Features	Price (Approx.)	Weight (Approx.)
Marmot Tungsten 2P	– Capacity: 2 people	$200-$250	4-5 lbs (1.8-2.3 kg)
	– Dimensions: ~32 sq ft floor area
	– Interior Height: ~42 inches
	– Freestanding design
	– Lightweight aluminum poles
	– 2 doors and 2 vestibules
	– Weather-resistant rainfly
	– Easy setup with color-coded poles
Big Agnes Copper Spur	– Capacity: 2 people	$400-$500	3 lbs 2 oz (1.4 kg)
HV UL2	– Dimensions: ~29 sq ft floor area
	– Interior Height: ~40 inches
	– Freestanding design
	– DAC Featherlite NFL poles
	– 2 doors and 2 vestibules
	– Silnylon rainfly with vent
	– Quick and easy setup
MSR Hubba Hubba NX	– Capacity: 2 people	$380-$450	3 lbs 13 oz (1.7 kg)
	– Dimensions: ~29 sq ft floor area
	– Interior Height: ~39 inches
	– Freestanding design
	– Easton Syclone poles
	– 2 doors and 2 vestibules
	– Durable and weatherproof rainfly
	– Fast and intuitive setup
REI Co-op Half Dome 2+	– Capacity: 2 people (with extra space)	$229	4 lbs 14 oz (2.2 kg)
	– Dimensions: ~38.1 sq ft floor area
	– Interior Height: ~42 inches
	– Freestanding design
	– DAC Pressfit aluminum poles
	– 2 doors and 2 vestibules
	– Waterproof rainfly with vents
	– Color-coded setup
Nemo Dagger 2P	– Capacity: 2 people	$400-$450	3 lbs 14 oz (1.8 kg)
	– Dimensions: ~31.3 sq ft floor area
	– Interior Height: ~42 inches
	– Freestanding design
	– DAC Featherlite NFL poles
	– 2 doors and 2 vestibules
	– Durable and waterproof rainfly
	– Easy setup with color-coded poles
Alps Mountaineering	– Capacity: 2 people	$120-$150	5 lbs 5 oz (2.4 kg)
Lynx 2	– Dimensions: ~37 sq ft floor area
	– Interior Height: ~46 inches
	– Freestanding design
	– Fiberglass poles
	– 2 doors and 2 vestibules
	– Weatherproof rainfly
	– Straightforward setup

How to set up the Marmot Tungsten 2P

Setting up the Marmot Tungsten 2P tent is a straightforward process. Here’s a general step-by-step guide to help you with the setup:

Before you begin: Make sure you have all the components needed for the tent setup: tent body, rainfly, poles, stakes, and guy lines.

Step 1: Choose a suitable campsite: Find a flat and level area to pitch your tent. Clear the ground of any rocks, sticks, or sharp objects that could damage the tent floor.

Step 2: Lay out the tent body: Unfold the tent body and lay it flat on the ground where you want to set up your tent. Make sure the door is facing the direction you want to enter and exit the tent.

Step 3: Assemble the tent poles: Take out the tent poles and assemble them according to their designated colors. Many tents use color-coded poles and grommets for easy setup. Follow the instructions provided with the tent to ensure the poles are correctly connected.

Step 4: Insert the poles: Insert the ends of the tent poles into the grommets on the corners of the tent body. The tent poles should form an “X” shape on each side of the tent.

Step 5: Clip the tent body to the poles: The Marmot Tungsten 2P usually has clips to attach the tent body to the poles. Slide each clip over the corresponding pole section until the tent body is securely attached to the frame.

Step 6: Stake down the tent: Once the tent body is attached to the poles, stake down the corners of the tent to secure it to the ground. Insert the stakes through the grommets located at the base of the tent corners and push them into the ground at a slight angle away from the tent.

Step 7: Attach the rainfly: If you expect any rain or want extra protection, attach the rainfly over the tent body. The rainfly typically clips or buckles onto the tent poles. Make sure it is centered and taut, covering the entire tent body.

Step 8: Stake out the rainfly and guy lines (if applicable): Stake out the rainfly’s vestibules and guy lines to increase stability and provide better weather resistance. Use the guy lines and additional stakes to secure the rainfly away from the tent body.

Step 9: Adjust and finalize: Check all the connections, tension the tent as needed, and make sure everything is properly secured. Adjust the guy lines and stakes to ensure the tent is stable and taut.

Pros of Marmot Tungsten 2P Tent

• Spacious: The Marmot Tungsten 2P tent has a spacious interior with a floor area of 32 square feet, which can comfortably accommodate two people and their gear.
• Easy to set up: The tent has a freestanding design and color-coded clip and pole system, making it easy to set up, even for beginners.
• Weather protection: The tent has a waterproof rainfly and floor with a high waterproof rating of 1500mm and 2000mm, respectively, providing excellent protection from rain and moisture.
• Ventilation: The tent has two doors and mesh panels that provide good ventilation and help to prevent condensation build-up inside the tent.
• Durable: The tent is made of high-quality materials, such as durable polyester taffeta, and has sturdy aluminum poles, making it durable and long-lasting.

Cons of Marmot Tungsten 2P Tent

• Heavy: The Marmot Tungsten 2P tent has a packed weight of 5 pounds 5 ounces, which can be considered heavy for backpacking trips.
• Limited headroom: The peak height of the tent is 42 inches, which may not be enough for taller individuals to sit up comfortably.
• Limited storage space: Although the tent has two vestibules, the storage space may be limited for two occupants, especially if they have bulky gear.
• Expensive: The Marmot Tungsten 2P tent is relatively expensive compared to other two-person tents on the market, which may not be affordable for some people.
• Not suitable for extreme weather: Although the tent provides good weather protection, it may not be the tent that is suitable for extreme weather conditions, such as high winds or heavy snow.

Conclusion 

The Marmot Tungsten 2P is a simple tent. It’s ideal for first-time campers or those searching for a low-cost car-camping tent. The Tungsten performs a wonderful job with a classic setup style. This style will be familiar to any outdoor user and adequate weather protection. But, the fly setup may be finicky, and you’ll want to make sure it’s properly tensioned in case of a windy night. There are just two internal pockets and one for the light. We wish there were a few more inside elements, but there is plenty of room for two people to sleep comfortably. It, as a whole, is a really valuable feature.

Frequently Asked Questions (FAQ’s)

1. What is the weight of the Marmot Tungsten 2P tent?
   The Marmot Tungsten 2P tent has a trail weight of 4 pounds 13 ounces (2.18 kg) and a packed weight of 5 pounds 5 ounces (2.4 kg).
2. What are the dimensions of the Marmot Tungsten 2P tent?
   The floor area of the Marmot Tungsten 2P tent is 32 square feet (2.97 square meters), and the peak height is 42 inches (106.7 cm). The tent has a length of 88 inches (223.5 cm) and a width of 54 inches (137.2 cm).
3. Is the Marmot Tungsten 2P tent freestanding?
   Yes, the Marmot Tungsten 2P tent is freestanding, which means that it can stand up on its own without the need for stakes or guylines. Using stakes and guylines can help to stabilize the tent in windy conditions.
4. How many doors and vestibules does the Marmot Tungsten 2P tent have?
   The Marmot Tungsten 2P tent has two doors and two vestibules. This provides convenient access and storage space for both occupants of the tent.
5. What is the material of the rainfly and floor of the Marmot Tungsten 2P tent?
   The rainfly of the Marmot Tungsten 2P tent is made of 68D polyester taffeta with a waterproof coating and a 1500mm rating. The floor is made of 70D polyester taffeta with a waterproof coating and a 2000mm rating. This provides excellent protection from rain and moisture.